Will Our Future High-Rises Be Made Of Wood?
Among all the buildings going up in the biggest boom in Portland real estate history, only one of them can be called the first of its kind in the nation.
Albina Yard is the first building in the nation to be constructed of domestically made Cross-Laminated Timber, which was milled in Riddle, Ore.
It’s a simple four-story building called Albina Yard on North Albina Street. It has a few noteworthy residents on the ground floor: Tanner Goods and a new bar, Wayback. The top three floors are all offices. But it’s the material stretching in between them that is the big deal. Instead of steel and concrete, the floors, ceilings and columns that make up this building are made of cross-laminated timber, or CLT for short.
State of Wonder’s architecture columnist-in-residence Randy Gragg stopped by to discusses how CLT stands to revolutionize construction, offering a pre-fabricated material that is faster to build, more resistant to earthquakes, and more sustainable than traditional practices; not to mention how it stands to jump-start rural economies.
CLT panels are pre-fabricated at the mill, shipped to the site, and craned into place, resulting in buildings that can go up much quicker with less mess and noise.
ldquo;A good analogy for me is thinking of it like a very large IKEA cabinet, where each piece is precision machined and then assembled with steel connectors,” said Thomas Robinson, a partner at Lever, the architecture firm that designed Albina Yard.
Last week, Lever received design approval for an 11-story high-rise in the Pearl district called Framework. The firm is in the final stages of proving CLT’s ability to withstand fire and support a building of such size with help from a $1.5 million Department of Agriculture grant and researchers at the University of Oregon, Portland State University and Oregon State University.
Lever Architecture has cleared design review to build an 11-story, mixed-use tower in the Pearl using cross-laminated timber in place of steel and concrete—the tallest in the nation.
Courtesy of Lever Architecture
CLT technology is used widely in Europe and Japan, and the state of Oregon is positioning itself to be a leader in the U.S. In addition to helping Lever clear the technology with regulators, UO and OSU have started the National Center for Advanced Wood Products Manufacturing, Sens. Jeff Merkley and Ron Wyden plugged $3.5 million for it into the agriculture bill now stuck in Congress, and Gov. Kate Brown has helped fund a CLT competition.
It’s safe to say the future is bright for CLT in Oregon.
Explore Nearby Adventures